Jess Lambert from Byron Bay coulkd dress up your board.
Check her out at : https://instagram.com/halcyon_lines
Wednesday, September 23, 2015
Sunday, September 20, 2015
Ever thought of building a wooden board - just do it
Just have a go it is a great learning experience.
Friday, September 18, 2015
Grain Surfboards host - Surf Re-Evolution
GRAIN SURFBOARDS CELEBRATES IT'S 10TH YEAR IN YORK, MAINE WITH
THE 5TH ANNUAL SURF RE-EVOLUTION EVENT, SEPTEMBER 26, 2015
At the Grain Surfboards workshop on a farm in coastal Maine, a day-long outdoor event called "Surf Re-Evolution" will be open to the public and held once again on what should be another beautiful fall day, September 26th. This event, growing in attendance every year, is popular with surfers and non-surfers alike, is kid-friendly and well known for the insane variety of activities that are included in the price of admission.
The Grain crew is joined by friends, shapers, sustainable product developers, environmentalists, artists and more, who come together from all over the country to celebrate the creativity, processes, and material advancements that are bubbling to the surface of the surf industry these days. The goal? a super-fun day filled with food, music and creativity, all while learning together about applying current technologies to some of the past's greatest ideas: Re-Evolution.
The day kicks off with a beach demo on Long Sands Beach from 8am -11am where attendees can try out boards of all shapes and sizes. The gates open on the farm at 1pm for the rest of the fun.
Among the activities planned are a series of presentations from special guests invited to share their knowledge about their re-evolutionary efforts. Question the experts on topics like these:
The Grain crew is joined by friends, shapers, sustainable product developers, environmentalists, artists and more, who come together from all over the country to celebrate the creativity, processes, and material advancements that are bubbling to the surface of the surf industry these days. The goal? a super-fun day filled with food, music and creativity, all while learning together about applying current technologies to some of the past's greatest ideas: Re-Evolution.
The day kicks off with a beach demo on Long Sands Beach from 8am -11am where attendees can try out boards of all shapes and sizes. The gates open on the farm at 1pm for the rest of the fun.
Among the activities planned are a series of presentations from special guests invited to share their knowledge about their re-evolutionary efforts. Question the experts on topics like these:
: The impossible dream of biodegradable and organic epoxies - happening today
: How to employ (and give back to) rural villages in Chile while making skateboards from beach trash
: How ancient Hawaiian finless surfboards have been reborn for today's surfer;
...and other initiatives helping to change the formerly dirty business of making surfboards into a model of sustainability for the world.
Wander around amongst visiting shapers and visit the DIY art stations, block printing table, wood-stove-fired surf-wax making exhibit, collage works, tarp surfing, and a showing in the hay-barn-turned-art-gallery of the works of renowned painter and surf-artist Andy Davis.
Enjoy two live musical acts, Atlantic Clarion's 10 piece steel drum band from Blue Hill Maine and music from local favorite, Tiger Belly. The event wraps up with two surf films projected on the side of the barn and a big bonfire to warm up by as day turns to night.
This year in addition to some delicious food provided by local restaurants like Flatbread and White Heron we’ll have great draft beer from Dogfish Head and Smuttynose.
Mike LaVecchia, co-owner of Grain Surfboards calls this event "my favorite part of building surfboards". Everyone's invited, tickets are available at the gate and discounted online. Ticket-holders for the Wall-to-Woods charity paddle event are admitted free.
...and other initiatives helping to change the formerly dirty business of making surfboards into a model of sustainability for the world.
Wander around amongst visiting shapers and visit the DIY art stations, block printing table, wood-stove-fired surf-wax making exhibit, collage works, tarp surfing, and a showing in the hay-barn-turned-art-gallery of the works of renowned painter and surf-artist Andy Davis.
Enjoy two live musical acts, Atlantic Clarion's 10 piece steel drum band from Blue Hill Maine and music from local favorite, Tiger Belly. The event wraps up with two surf films projected on the side of the barn and a big bonfire to warm up by as day turns to night.
This year in addition to some delicious food provided by local restaurants like Flatbread and White Heron we’ll have great draft beer from Dogfish Head and Smuttynose.
Mike LaVecchia, co-owner of Grain Surfboards calls this event "my favorite part of building surfboards". Everyone's invited, tickets are available at the gate and discounted online. Ticket-holders for the Wall-to-Woods charity paddle event are admitted free.
Details:
Surf Re-Evolution
Saturday September 26th 2015
Long Sands Beach: 8am - 11am
Grain Surfboards, 60 Brixham Rd, York Maine: 1pm - 9pm
More Information:
Surf Re-Evolution Information:
info@grainsurfboards.com
grainsurfboards.com/re-evolution2015
Wall-to-Woods 18-mile Ocean Paddle Charity Event:
grainsurfboards.com/giveback/h4o
pr@grainsurfboards.com
Surf Re-Evolution
Saturday September 26th 2015
Long Sands Beach: 8am - 11am
Grain Surfboards, 60 Brixham Rd, York Maine: 1pm - 9pm
More Information:
Surf Re-Evolution Information:
info@grainsurfboards.com
grainsurfboards.com/re-evolution2015
Wall-to-Woods 18-mile Ocean Paddle Charity Event:
grainsurfboards.com/giveback/h4o
pr@grainsurfboards.com
Saturday, September 12, 2015
Great little body board from Anthony
Anthony and I had been in touch about him building this board and it being unglassed and this is his story.
"I spoke with you some time ago about using lanolin and FMP 200 glue. I was finally able to purchase the products. I applied the use to off cuts of balsa and paulownia in making a foam core body board.
The glue worked a treat.
I applied three coats of lanolin to balsa and paulownia offcuts (approx 30cm long) to observed the colour variations. Nil issues. I noticed both samples turned a honey colour. Used a bit of elbow grease and wiped the samples which made them smooth again and reflect a satin finish.
I then went to the beach to wet the samples. Both went waxy after a little while. That was great.
I then completed my body board (attached some photo's to the email). I made my own leash pug using aluminum off and stainless steel pin.I applied three coats of lanolin to the deck allowing it to dry between coats. i used an epoxy resin to the rocker and rails as I was trying out a new resin.
Today I did a one test hour run in the surf (approx 1-1.5metre waves). The board performed better than I anticipated. You may notice two strips of red cedar along the rails. Something different and no issues in making turns.
However I noticed the deck went pale (appeared to lose that honey colour) and did not get as waxy as the samples. I am assuming more than three coats are needed when covering a larger surface. I have recoated the deck by pouring on the lanolin and spreading with a foam brush rather than using a bristle brush."
"I spoke with you some time ago about using lanolin and FMP 200 glue. I was finally able to purchase the products. I applied the use to off cuts of balsa and paulownia in making a foam core body board.
The glue worked a treat.
I applied three coats of lanolin to balsa and paulownia offcuts (approx 30cm long) to observed the colour variations. Nil issues. I noticed both samples turned a honey colour. Used a bit of elbow grease and wiped the samples which made them smooth again and reflect a satin finish.
I then went to the beach to wet the samples. Both went waxy after a little while. That was great.
I then completed my body board (attached some photo's to the email). I made my own leash pug using aluminum off and stainless steel pin.I applied three coats of lanolin to the deck allowing it to dry between coats. i used an epoxy resin to the rocker and rails as I was trying out a new resin.
Today I did a one test hour run in the surf (approx 1-1.5metre waves). The board performed better than I anticipated. You may notice two strips of red cedar along the rails. Something different and no issues in making turns.
However I noticed the deck went pale (appeared to lose that honey colour) and did not get as waxy as the samples. I am assuming more than three coats are needed when covering a larger surface. I have recoated the deck by pouring on the lanolin and spreading with a foam brush rather than using a bristle brush."
Thursday, September 10, 2015
A great story and a bit of history shared
"In early 2006, I was 19-years-old, and shaping my first
surfboard. I drew up plans for a 6’5 solid-Balsa single fin with five
redwood stringers. I really had no idea what I was getting myself into,
but I knew I wanted to take my time. My grandparent’s life-long
compadre, and dear family friend, Pete Tresselt recently had his
early-60′s Balsa Hobie restored, so I figured it would be worth a quick
trip to Laguna to visit Pete and see his Balsa board. I hoped to glean
some inspiration and tips in the process, however Pete went above and
beyond. After I spoke to him, he called his friend Terry Martin and
asked if he could bring me by. I was ecstatic… Terry was possibly the
most incredible surfboard craftsman in history…and certainly one of my
favorites (and Griffin’s also). Coincidentally, Terry was working on a
pair of Balsa longboards the day I went down. I spent a couple hours
talking to Terry as he worked. Terry was more than gracious enough to
talk me through the basics of shaping Balsa, and how different it was
from shaping foam. My time with Terry was memorable, helpful and
inspiring… my only regret is that I didn’t bring a camera.
Flash forward to 2014: Cameron, Chad and I made a trip to the Tresselt’s house in Laguna to do a proper interview with Pete, and hear some of his priceless surf stories. Pete lived in Makaha in the 1950′s and shared a Quonset hut with some very familiar names in surf history. He later bought his first lobster fishing boat from Renny Yater. He still has that 1963 Hobie Balsa D-Fin hanging in his living room. This interview includes some of our favorite stories and moments from our day with Pete Tresselt, a true Surfer + Craftsman"
Flash forward to 2014: Cameron, Chad and I made a trip to the Tresselt’s house in Laguna to do a proper interview with Pete, and hear some of his priceless surf stories. Pete lived in Makaha in the 1950′s and shared a Quonset hut with some very familiar names in surf history. He later bought his first lobster fishing boat from Renny Yater. He still has that 1963 Hobie Balsa D-Fin hanging in his living room. This interview includes some of our favorite stories and moments from our day with Pete Tresselt, a true Surfer + Craftsman"
Tuesday, September 8, 2015
Silver Paddle Boards
Clayton Sansbury is the talented guy behind Silver Paddleboards based in Vancouver
He just built this hollow wooden Paddleboard/Artist Collaboration as birthday present. The 11’x30” board is built out of a resawn Western Red Cedar 2" x12" board with yellow Cedar accents. The coolest part is it artwork was done by the recipients 4 & 7 year-old daughters.
For more info or to order a board : www.sliverpaddleboards.com
Monday, September 7, 2015
The long shortboard or the short longboard by Alan Copelin
Skins over frame design and glassed finish.
Wednesday, September 2, 2015
Grain Surfboards , hard core board builders and hard core surfers
The boys at Grain have some up coming board building classes so if you want a trip to the country to join them you need to book soon.
" Labor Day is here and we're looking ahead to autumn after a fast, busy summer. Fall in New England is like gold: in a way, it’s the locals' own summer. It's a time when the beaches become ours again, the waves more consistent, the air cool, the water warm and the sun, golden. As the days shorten, it’s a bittersweet time of year, but one of our favorites.
Still looking to join us in Maine to build your own? There's still two autumn classes with a few spots left, October 22nd - 25th and November 12th - 15th. Seats often get gobbled up overnight, so if you're interested, don’t dawdle. Call the west coast home? Still a couple of shaping stands open for our November 12th - 15th class at Firehouse 33 in San Francisco."
grainsurfboards.com
Tuesday, September 1, 2015
Another Paulownia contact for supply in Europe
I have just found this new company that has a range of products that could be used for building wooden surfboards.
